.jpg)
Buy RevSane, get a free gift with purchase:
As you may already know, Dr. Jekyll and Mr. Hyde influenced Rob Papen's other FX plugin called DelSane, and it was a matter of time (4th dimension) before these two guys would show up for an insane battle and.... Voila, let them now introduce you to RevSane!
First and foremost, RevSane produces beautiful dense reverb sounds, musically perfect for any track! But that is only one side of the story...
By using the ‘Disrupt Sphere’ you can control the flow of the reverb parameters and make the RevSane a dynamically fresh-sounding special FX.
The ‘Disrupt’ parameter, with its many features, allows you to think outside of the 4th dimension by using Reverb in creative ways! Dynamically changing spaces ...without recording trillion parameters...by simply moving the ‘Disrupt Sphere-Slider’. Additionally, RevSane has an audio follower that includes side-chain control of the parameters, even for controlling the ‘Disrupt Sphere’ itself!
And no... RevSane is not only for the creative producers that love to experiment with the ‘Disrupt Sphere’, it is also for the one that seeks a top-notch dense-sounding Reverb for their productions!
Features
General Info
- Algorithm Reverb with, Distortion, Early Reflection, and Late Reflection.
- Disrupt Sphere control for creating FX changes.
- Audio Input Follower, for controlling RevSane's parameters.
- GUI sizes available are 100%, 125%, 150%, and 200%
General Controls
- Volume control
- Edit / Original compare function
- ECS (external MIDI controller setup)
- Help ? opens the 'User Guide'
- Control menu (upper right-hand side) with various general setting options.
- Wet only button
Preset Section
- Presets are stored as files in clear categorized bank folders
- 'Quick Browser', 'Recently Browsed' and 'Favourite' functions
Distortion
- Fuzz Distortion
- Amount control
- On/Off control
Early Reflections
- Complex Early Reflection algorithm
- Routing into Reverb or direct
- Length / damping / early-feedback / side-feedback / cross-feedback control
- On/Off control
Reverb
- RPCX Algorithm reverb
- Models: Hall Clean | Hall cave | Hall Warm | Room Cold | Room Edged | Room Storm | Vintage Type 1 | Vintage Type 2 | Space Orbit 1 | Space Orbit 2
- Reverb Size control
- Reverb Length control
- Pre-delay with disorder control
- Tempo Sync option for Pre-delay
- Damping control
- Low-pass and Hi-pass filters with On/Off buttons
- Volume control
- On/Off control
Late Reflection
- Late reflection delay
- Routing into reverb or direct
- Length control
- Tempo Sync option
- Damping control
- Volume control
- On/Off control
Audio Follower
- Inputs available: input, side-input, Distort Output, Early Output, Reverb Output, Late Output, Output.
- Smoothing control
- Destination menu
- Amount control
- On/Off control
Disrupt Sphere
- The Sphere-Slider holds 8 available controls that can be connected to RevSane parameters.
- The Sphere-Slider can move back to the center in a tempo-based way which we call the ‘Spring’ feature.
- Spring back quantize.
- ‘Lazy Mode’ so that the movement of the Sphere-Slider can be automated in different directions, which allows you to also create creative new types of sounds.
- 'Lazy Mode' start triggers: Host (music program start) | Note | Pitch Bend | Mod Wheel | Breath Controller | Foot Pedal | Expression Pedal | MIDI Controllers 16-21 84-90
MIDI & Mod 1&2
- ‘MIDI & MOD 1 & 2’ control section can be used to influence various RevSane parameters including the ‘Disrupt Sphere-Slider’.
- 2 possible sources with amount control.
- 2 possible destinations with a amount control
Back Panel
- Computer keyboard up/down
- MIDI preset change
- MIDI bank select
- External MIDI control capture mode
- MIDI Channel control
- Dial Animation
- Screen size 100%, 125%, 150%, and 200%
System Requirements
PC
- Windows 7 / Windows 8 / Windows 10 / Windows 11 (32 & 64 bit)
Formats:
- VST
- AAX (Note: PC AAX for PT 12 or higher)
- Compatible with NI NKS system
Mac
- OS-X 10.13 or higher (Apple Silicon Compatible)
Formats:
- AU
- VST
- AAX
- Compatible with NI NKS system
Notes:
- Serial/license system with activation whilst registering the product
- 2nd serial for a secondary computer/laptop is available after you have registered the product’s original serial/license.
(SubBoomBass is used as the example).
Mac
1. Visit Rob Papen and create an account by selecting 'Create Account'.
Note: If you already have an account set up with Ron Papen, 'Login' to your account and skip to step 4. of the installation process.
2. Enter your personal details, and once completed check the tick box that reads 'Yes, I agree to Privacy Policy Rob Papen' before clicking 'Send Registration'.
3. The registration of your account has successfully been completed > select 'click here to login' to access your account area.
4. Select the 'My Products' tab, which is located at the top-left corner of your account area.
5. Click the 'Register New' option.
6. Select the product that you have purchased, as well as the most recent version number (which in this instance is 'Online'), before manually entering/copying and pasting the 32-digit Serial Number that is provided within your User Account > once completed, click the 'Save' tab to register your software.
Note: Ensure that you select the correct 'Product' and 'Type', as well as checking that there are no spaces/mistakes when entering your Serial Number > if you receive a code error message of any kind, refresh the web page and manually enter the digits (including the '-' hyphens) before re-clicking the 'Save' option.
7. The registration of your software has successfully completed > select the 'Download latest version: SubBoomBass' hyperlink to navigate to the software download area.
8. Select the relevant format installer download (s) in accordance with your DAW's compability specifications, to inititiate the downloading of your purchased software.
Note: The product user manual is also obtainable from this location.
9. Once the software installer file has finished downloading, click the file entitled 'SubBoomBass_Installer.dmg' to launch the application installer application.
10. Double-click the 'SubBoomBass_Installer.pkg' application icon begin the installation process.
11. Click 'Continue' to verify the installation, if prompted to do so.
12. Click 'Continue' once again.
13. Read through the Licence Agreement > click 'Continue' then 'Agree'.
14. Manually enter/copy and paste the original 32-digit Serial Number that you were provided with, before clicking 'Continue' (the Serial Number is located in both your Plugin Boutique and Rob Papen User Accounts).
Note: Ensure that you select the correct 'Product' and 'Type', as well as checkingt that there are no spaces/mistakes when entering your Serial Number > if you receive a code error message of any kind, manually enter the digits (including the '-' hyphens) before re-clicking the 'Continue' option.
15. Review the installation before clicking 'Install', and then 'Continue Installation'.
16. The installation of your software has successfully completed > click 'Restart' to reboot your computer.
Note: Ensure that you have saved any important work that may be open within the applications you currently have open, before selecting the 'Restart' option.
17. After your computer has successfully restarted, open your DAW and locate/open your newly installed/activated software VST.
Note: If the software fails to appear, rescan your DAW's Plug-in selection.
The Software is now Activated and Ready for Use Within Your DAW!
Windows
1. Visit Rob Papen and create an account by selecting 'Create Account'.
Note: If you already have an account set up with Ron Papen, 'Login' to your account and skip to step 4. of the installation process.
2. Enter your personal details, and once completed check the tick box that reads 'Yes, I agree to Privacy Policy Rob Papen' before clicking 'Send Registration'.
3. The registration of your account has successfully been completed > select 'click here to login' to access your account area.
4. Select the 'My Products' tab, which is located at the top-left corner of your account area.
5. Click the 'Register New' option.
6. Select the product that you have purchased, as well as the most recent version number (which in this instance is 'Online'), before manually entering/copying and pasting the 32-digit Serial Number that is provided within your User Account > once completed, click the 'Save' tab to register your software.
Note: Ensure that you select the correct 'Product' and 'Type', as well as checking that there are no spaces/mistakes when entering your Serial Number > if you receive a code error message of any kind, refresh the web page and manually enter the digits (including the '-' hyphens) before re-clicking the 'Save' option.
7. The registration of your software has successfully completed > select the 'Download latest version: SubBoomBass' hyperlink to navigate to the software download area.
8. Select the relevant format installer download (s) in accordance with your DAW's compability specifications, to inititiate the downloading of your purchased software.
Note: The product user manual is also obtainable from this location.
9. After the software installer file has finished downloading, double-click the file entitled 'SubBoomBass_Installer' .zip folder to extract the .exe installer file.
10. Once extracted, double-click the .exe installer file to begin the installation process > click 'Next'.
11. Read through the Licence Agreement and select 'I accept the agreement' > click 'Next'.
12. Type in your preferred User Name, Organization and manually enter/copy and paste the original Serial Number that you were provided with, before clicking 'Continue' (the Serial Number is located in both your Plugin Boutique and Rob Papen User Accounts).
Note: Ensure that you select the correct 'Product' and 'Type', as well as checking that there are no spaces/mistakes when entering your Serial Number > if you receive a code error message of any kind, manually enter the digits (including the '-' hyphens) before re-clicking the 'Next' option.
13. Select a computer VST Plug-ins folder destination in which to install/save your software to > click 'Next'.
14. Select a computer Library location in which to install/save your software to > click 'Next'.
15. Select the software format (s) that you wish to install > click 'Next'.
16. Select a Start Menu Folder to create a shortcut to your new software installation > click 'Next'.
17. Review the installation and click 'Install'.
18. The installation of your software has successfully completed > click 'Finish'.
19. After your computer has successfully restarted, open your DAW and locate/open your newly installed/activated software VST.
Note: If the software fails to appear, rescan your DAW's Plug-in selection.
The Software is now Activated and Ready for Use Within Your DAW!
