SoundID Reference for Multichannel and Apollo Monitor Correction Add-on Bundle

Enhance your monitoring with SoundID Reference integrated directly into Universal Audio’s Apollo X Gen 1 and Gen 2 interfaces. This bundle combines SoundID Reference for Multichannel and the Apollo Monitor Correction Add-on into a single license key.

SoundID Reference for Multichannel

Reliable Reference Sound for Multichannel Setups

A headphone calibration software delivers consistently accurate studio reference sound on your existing headphones. The software includes presets of more than 500 headphone calibration profiles. With an applied headphone calibration profile the software sets the frequency response target to be completely flat across all audible frequencies. The headphone frequency response target is designed to emulate neutral-sounding speakers. With calibrated headphones, you’ll hear a flat, consistent sound wherever you go.

Create with Ease on any Setup - Accurate speaker measurements and calibration for audio systems from stereo up to 9.1.6 channels.

Mix with Confidence - Perfect translation with accurate frequency response and sharp soundstage.

Calibrate any Multichannel Setups up to 9.1.6 Atmos Rooms - Compatible with most popular hardware setups and all major DAWs. Supported plugin formats include VST2, VST3 AAX, and AU.

Intuitive Speaker Measurement

Through a user-friendly measurement process, an intuitive guide helps you to calibrate studio speakers with an individually calibrated measurement microphone with ease.

Perfect Time Alignment

Phase based time alignment of your satellite & LFE channels with sub-millisecond accuracy for perfect sound staging.

Choose Your Target Mode

Correct for the Dolby Atmos Music curve, flat frequency response, or create a custom profile.

Versatile Export Possibilities

In a few simple steps apply a calibration profile via the plugin or export to supported hardware devices.

How It Works

Starting with SoundID Reference for Multichannel

Step 1 - Measure Speakers

• Using an individually calibrated SoundID Reference measurement mic that offers multi-angle microphone calibration curves for accurate measurements.

Step 2 - Calibrate with Hardware or Plugin

• Run the SoundID Reference plugin in your preferred DAW or export the calibration profile to supported hardware units.

Step 3 - Hear the Difference

• Begin and complete a project from A-Z and compare it to your reference tracks to experience better translation across devices.

Step 4 - Adjust Your Target

• Create a custom target curve and limit the calibration range for your whole setup or separate channel groups.

Key Features

Reliable, Consistent, Easy- to-Use Calibration Software for All of Your Audio Systems:

• Accurate speaker measurements and calibration for audio systems from stereo up to 9.1.6 channels
• High-accuracy SoundID Reference Measurement Microphone with individual multi-angle calibration curves
• Ready-to-use headphone calibration for 480+ models

Control Your Target Sound:

• Flat target curve used by over 100k music creators globally
• Customise your target by limiting the calibration frequency range or adjusting the target curve manually

High Performance and Flexibility:

• Zero latency plugin DSP for Multichannel
• Phase alignment of channels for high accuracy time delay calibration
• Native support for the Apple Silicon platforms / M1 chip

Export your Calibration Profile to Supported Hardware:

• AVID MTRX with SPQ DSP
• AVID MTRX Studio
• DAD AX32 with SPQ DSP
• Dolby Atmos Renderer Mastering suite
• Jones-Scanlon Studio Monitors

What's Included?

• Activation key for the product license: the product can be activated and used on 3 machines
• SoundID Reference DAW plugin for Multichannel (AAX, AU, VST2, VST3)
• SoundID Reference standalone app for Stereo (ASIO, WASAPI, APO, HAL)

Learn more about SoundID Reference for Multichannel.

Apollo Monitor Correction Add-on for SoundID Reference

Enhance your monitoring with SoundID Reference integrated directly into Universal Audio’s Apollo X Gen 1 and Gen 2 interfaces. This add-on provides top-tier speaker and headphone calibration by Sonarworks, delivering accurate sound from stereo to multichannel with minimal latency. Achieve consistent, professional results across any listening environment, making it a must-have for both audio pros and enthusiasts.        

Features

• Speaker and headphone calibration running directly on Apollo X hardware.
• Hardware calibration for popular stereo and surround speaker layouts (from stereo to 9.1.6).
• Hardware calibration for over 500+ supported headphone models.
• Multiple outputs calibrated simultaneously: one speaker profile, and up to two
• headphone profiles (depending on the Apollo X model used)
• Calibrated bass management for stereo speaker setups with subwoofer
• Supported target modes include: Flat, Dolby Atmos Music curve, user Custom
• Target, and various device emulation targets via Translation Check.
• Near-zero latency integrated performance. 

What's Included

• Activation key for the Apollo Monitor Correction Add-on product license
• The add-on can be activated and used on 3 devices

Learn more about Apollo Monitor Correction Add-on for SoundID Reference.

System Requirements

macOS

• macOS 11 or higher
• AAX, VST, AU

Windows 

• Windows 10 or higher
• AAX, VST, AU

A supported Apollo X audio interface

• Apollo X Gen 1: Apollo Twin X Duo/Quad, Apollo Twin X USB, Apollo x4,
• Apollo x6, Apollo x8, Apollo x8p, Apollo x16
• Apollo X Gen 2: Apollo Twin X Duo/Quad, Apollo x4, Apollo x6, Apollo x8,
• Apollo x8p, Apollo x16, Apollo x16D